HP Integrity iLO 3 Operations Guide

Table 21 Power Meter Readings description (continued)
DescriptionItem
Average Displays the average power usage of all the samples collected.
Minimum Displays the lowest power usage of the samples collected.
Power Regulator & Capping
The Power Regulator & Capping page enables you to view and control the power regulator and
power capping settings for the server. To change this setting, you must have the Configure iLO
Settings user right.
The Power Regulator feature is available on systems where support is provided by the operating
system, processors, PDH (processor dependant hardware), SFW (System Firmware), and iLO
firmware. For more information on power regulation support, see your server model Quickspecs
document.
Figure 27 Power Regulator & Capping
Table 22 Power Regulator & Capping description
DescriptionItem
Power Regulator Settings Dynamic Power Savings Mode This mode enables the system to dynamically
change processor p-states when needed based
on current operating conditions. The
implementation of this mode is operating system
specific. For details, see your operating system
documentation.
Static Low Power Mode This mode sets the processor to the lowest
supported power consumption state and forces it
to stay in this lowest state.
Static High Performance Mode This mode sets the processor to the highest
supported performance processor state and forces
it to stay in this highest state.
94 Using iLO 3