HP-UX Errata for HP Integrity BL860c i2, BL870c i2 & BL890c i2 Server Blades - Additional HP-UX 11i v3 (B.11.31) drivers, products, and patches

HP-UX Errata for HP Integrity BL860c i2,

BL870c i2 & BL890c i2 Server Blades

Additional HP-UX 11i v3 (B.11.31) drivers,

products, and patches

Part Number: 5991-8079_ed4

Fourth edition: December 2010

PAGE 1
HP-UX Errata for HP Integrity BL860c i2, BL870c i2 & BL890c i2 Server Blades Additional HP-UX 11i v3 (B.11.
PAGE 3
Introduction HP requires the installation of the HP-UX 11i v3 OE Update Release for March 2010 and the additional components from this Errata document for the initial HP-UX support of these new HP Integrity server blades. The new HP Integrity server blades cannot be supported on OE Update releases before March 2010. Please download the additional components from the HP Software Depot site (http:// software.hp.com) and IT Resource Center (http://itrc.hp.com).
PAGE 4
• System Management Plus – SysMgmtPlus • Direct Attached Storage Provider – DASProvider (WBEMP-Storage) To download the Diagnostics Products Collection for HP-UX 11i v3 (DiagProdCollection), go to https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber= DiagProdCollection.
PAGE 5
HPVM 4.2.5 host requires a new patch before updating server blade firmware (can be found at http://itrc.hp.com) • PHSS_4154311.31 – HPVM B.04.20.05 CORE PATCH (Patch required for Dec ’10 firmware upgrade with 8GB DIMM support.) Patches required for HP-UX 11i v2 guests running on 11i v3 server blade host (can be found at http://itrc.hp.com) • PHCO_40685 – 11.23 Cumulative machinfo command patch • PHKL_40684 – 11.
PAGE 6