HP Integrity cx2600 Operations and Maintenance Guide

8 Specifications
Introduction
This chapter provides the power requirements, operating conditions (environmental
requirements), physical requirements, hardware specifications, and video resolutions of the hp
Integrity cx2600 Server. The following tables provide the specifications required for normal
operation of the hp Integrity cx2600 Server.
NOTE: The specifications and requirements for the power supply and environment can vary
if you install a mass storage device in the server that has more stringent environmental limits
than required for the HP Server. Ensure that the operating environment for any mass storage
devices you intend to install are compatible with the server environmental requirements.
Hardware Specifications
Table 8-1 Hardware Specifications
Intel® Itanium® (1 or 2 processors):
1.3 GHz/3 MB.
Micro-processors
Supports up to 12 Double Data Rate (DDR) registered
ECC Memory, in PC1600 DIMMs. Supported DDR DIMM
Memory
sizes: 128 MB, 256 MB, 513 MB, 1 GB, and 2 GB. Requires
DIMMs to be added in quads of equal capacity.
1 GB 10/100 MB, (and 10/100 MB management LAN).LAN
Four 64-bit PCI slots, 133 MHz slots.PCI Slots
Three serial ports, 2 USB ports, integrated RJ-45 LAN,
and 1 ea. for keyboard and mouse.
Core I/O
DVD-R/CD-ROM drive; IDE interface; 48x speed.DVD-ROM
Maximum internal storage: three 73 MB, 15K drive.Mass Storage
2 external SCSI ports.External Storage
1+1 (redundant) configuration. Under normal operating
conditions, the two power supplies share the load.
Power Supply
Dimensions and Weights
This section provides dimensions and weights of hp Integrity cx2600 Server components.
Table 8-2 Server Component Dimensions
ValueDimension
6.71 (173)Height
17.32 (440)Width
20 (508)Depth
Unloaded 62 (28.1)
Fully loaded 70 (31.75)
Weight
166 Specifications