HP Integrity cx2600 Operations and Maintenance Guide

Figure 3-11 Installing the PCI-X Card Cage
3. Press the release lever down into position to lock the card cage into place in the chassis.
4. Install the chassis top cover. See “Installing the Top Cover” (page 30).
5. Reconnect rear panel cables, and turn on the system.
6. To verify that you have correctly installed the PCI-X card, run the info io command at
the EFI Shell.
Installing Processors
This section provides information about installing processors and memory.The processors and
memory are located on the system board and are accessible after removing the top cover and air
guides. Processor 0 (CPU 0) is located closer to the chassis side panel and processor 1 (CPU 1) is
located closer to the DIMM sockets. (See in Figure 3-12.)
Your hp Integrity cx2600 Server may be delivered with one or two processors installed. You may
wish to install the second processor, or replace the processors with newer, compatible processors.
Additional or larger DIMMs may be available for installation. The following sections provide
detailed procedures for removal and installation of processors and memory.
Installing Processors 37