HP Integrity cx2600 Operations and Maintenance Guide

CAUTION: Do not press the processor module into the socket. When properly aligned, the
processor pins seat into the socket by themselves. No additional pressure is required. You
can damage the pins if you apply pressure.
Figure 3-23 Aligning the Processor Power Module
11. Use the Allen side of the IPF-CPU tool to lock the processor in place on the system board.
To do this, insert the IPF-CPU tool into the hole that runs down the side of the heatsink and
rotate the cam on the processor socket clockwise 180 degrees.
CAUTION: Do not rotate the cam on the processor socket too far or you can cause damage
to the locking mechanism.
12. Slide the sequencing retainer plate toward the front of the server.
13. Tighten the four captive screws of the heatsink in the order shown in Figure 3-24. Tighten
each screw one-half turn, and then tighten the next screw. Continue this sequence until the
heatsink is secured to the system board.
46 Installing Additional Components