HP Integrity cx2600 Operations and Maintenance Guide

Table 5-1 EFI Commands (continued)
DefinitionBCH Command Parameters (PA-RISC)BCH Command
Equivalent
(PA-RISC)
EFI Shell Command
Display firmware version for
PDC, ICM, and complex
IOinfo io
Display core LAN station
address
LanAddresslanaddress
Display memory informationMemoryinfo mem
Display processor informationPRocessorinfo cpu
SERvice
Clear (zero) the contents of
PIM
CLEARPIMerrdump clear
Read memory locations scope
of page deallocation
<addr> [<len>] [<type>]MemReadmm
Display or clear the page
deallocation table
page deallocation
table (pdt)
pdt
Display PIM information[<proc>] [HPMC|LPMC|TOC|ASIC]]processor internal
memory (PIM)
errdump mca
errdump cmc
errdump init
EFI/POSSE Commands
This section describes the EFI/POSSE commands developed for the server.
NOTE: EFI and Pre-OS System Environment (POSSE) are similar. EFI is an Intel specification,
whereas POSSE is the HP implementation that aids HP support.
help
Provides information on the EFI Shell commands. It also has an additional feature to aid those
familiar with the BCH menus of PA-RISC servers to adjust to their equivalent functions in EFI.
Syntax
help [-b] <category>
help [-b] <cmd>
help [-b] bch <bchmenu> <bchcmd>
Parameters
-b Enable page breaking
category Category of commands to view help on commands
cmd Shell command name on which to provide verbose information
bch Display the list of BCH commands and their corresponding EFI
bchmenu BCH menu name taken from the top level of the BCH menu
bchcmd BCH command on which to display information
Operation
If help is initiated with no parameters, it displays a list of shell command categories. To list all
of the commands within a category, enter help <category>. If help is issued with the -b
option, any output longer than one page pauses after each page displays. If a shell command
name is used as a parameter, verbose help displays for that command.
If you issue the help command with the bch option, it displays a list of BCH commands and
their corresponding EFI/POSSE commands. It instructs you to repeat the command line followed
76 Utilities