Installation Instructions - HP Server Slide Mount Kit AB296A for HP 10000 Rack

HP Server Slide Mount Kit for HP 10000 Rack – Installation Instructions
Installation Procedure
Chapter 1
7
Figure 1-4Attach the Outer Slide Assemblies to Rack Columns
Step 6. Tighten the rear screws (loosened in step 4) on the slide rails.
Step 7. Install cage nuts in front rack columns, above the slide as shown below.
Figure 1-5Attach Kit Hardware to Rack Front Columns
rckrails4
Outer Slide
T15 Screws
mtghdwr1
Cage Nuts
T25 Screws