Installation Instructions - HP Server Static Mount Kit AB293A for NEBS 2000 Rack

HP Server Static Mount Kit for NEBS 2000 Rack – Installation Instructions
Installation Procedure
Chapter 1
5
Step 2. Attach the cable routing brackets to the server chassis using T15 flathead screws.
Figure 1-2Attach the Cable Routing Brackets to the Server Chassis
Step 3. Attach the rear rack mount brackets to the rear columns as shown in Figure 1-3 using T25 panhead
screws.
Figure 1-3Attach the Rails to the Rack Columns
Step 4. Install the left and right rack mount rails to the left and right columns as shown in Figure 1-3.
Secure rails to the front rack columns and to the rear rack mount brackets with T25 screws.
Step 5. Install four retainer bars to the inside of the rack columns, above the rails as shown in Figure 1-3.
Secure each retainer bar with one T25 screw, using the top threaded hole in each retainer bar.
chasbrkt1
Cable
Routing
Bracket
T15
Flathead
Screws
rckrails1
Chassis Rear
Mount Bracket
Right Rack
Mount Rail
Chassis Rear
Mount Bracket
Retainer Bar
T25
Screws
T25
Screws
Rear Rack
Mount Bracket
Left Rack
Mount Rail