HP Server Static Mount Kit AB295A for HP 10000 Rack Installation Instructions Manufacturing Part Number: AB295-96001 April 2004 U.S.A. © Copyright 2004 Hewlett-Packard Development Company, L.P..
Legal Notices Copyright Notices. © Copyright 2004 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Printed in the U.S.A.
1 HP Server Static Mount Kit for HP 10000 Rack – Installation Instructions Introduction This manual provides instructions for static mounting the hp Integrity cx2600 server chassis in a HP 10000 rack. Cabinet Safety Precautions WARNING Ensure that the rack is level and stable before working on the rack. Be sure the leveling jacks (feet) extend to the floor and that the full weight of the rack rests firmly on the floor. WARNING Ensure that the rack has anti-tip measures in place.
HP Server Static Mount Kit for HP 10000 Rack – Installation Instructions Installation Procedure Installation Procedure Figure 1-1 HP Integrity cx2600 Servers Mounted in a HP 10000 Rack 2600inrack2 Mounting Kit Before mounting your server in the HP 10000 rack, inspect the mounting kit hardware. Check that all required mounting hardware is available. A mounting kit parts list is provided at the rear of this manual. Mount the Server Mount a server in the HP 10000 rack as follows: Step 1.
HP Server Static Mount Kit for HP 10000 Rack – Installation Instructions Installation Procedure Figure 1-2Attach the Brackets and Rack Ears to the Server Chassis Rear Cable Routing Bracket T15 Flathead Screws Rear Rack Ear chasbrkt2 Step 2. Attach the rear rack ears to the server chassis using T15 flathead screws. Step 3. Install left and right HP 10000 rack rails at desired position in rack as shown in Figure 1-3.
HP Server Static Mount Kit for HP 10000 Rack – Installation Instructions Installation Procedure Figure 1-4Insert the Server into the Rack Cage Nuts T25 Screws chasmnt2 Step 5. From the rear of the rack, secure the server rack ears to the rails using four T25 M5 screws as shown in Figure 1-5. Figure 1-5Secure the Server Chassis at the Rear of the Rack Cable Management Bar T25 10x32 Screws cmbar4 T25 M5 Screws T25 10x32 Screws Step 6.
HP Server Static Mount Kit for HP 10000 Rack – Installation Instructions AB295A Rack Mount Kit AB295A Rack Mount Kit The HP Server Mounting Kit, part number AB295A includes the items listed below.
HP Server Static Mount Kit for HP 10000 Rack – Installation Instructions AB295A Rack Mount Kit 8 Chapter 1
