Installation Instructions - HP Server Static Mount Kit AB295A for HP 10000 Rack

HP Server Static Mount Kit for HP 10000 Rack – Installation Instructions
Installation Procedure
Chapter 1
6
Figure 1-4Insert the Server into the Rack
Step 5. From the rear of the rack, secure the server rack ears to the rails using four T25 M5 screws as
shown in Figure 1-5.
Figure 1-5Secure the Server Chassis at the Rear of the Rack
Step 6. Hold the cable management strain relief bar to the cable routing brackets and secure it in place
with four T25 10X32 screws.
chasmnt2
Cage Nuts
T25 Screws
cmbar4
Cable
Management
Bar
T25
10x32
Screws
T25 M5
Screws
T25 10x32
Screws