Safety and Regulatory Information HP Integrity cx2600 Regulatory Model Number: RSVLA-0303-DC Manufacturing Part Number: AB216-96004-en Third Edition February 2007 © Copyright 2007 Hewlett-Packard Development Company, L.P.
Legal Notices Copyright Notices. © Copyright 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
HP Integrity cx2600 System Safety and Regulatory Information Overview 1 HP Integrity cx2600 System Safety and Regulatory Information Overview Regulatory Compliance statements are required by some countries or regions for international importation of HP servers.
HP Integrity cx2600 System Safety and Regulatory Information Overview Notational Conventions WARNING Warnings highlight procedures or information necessary to avoid injury to personnel. The warning should tell the reader exactly what will result from what actions and how to avoid them. CAUTION A caution highlights procedures or information necessary to avoid damage to equipment, damage to software, loss of data, or invalid test results. NOTE A note highlights supplemental information.
HP Integrity cx2600 System Safety and Regulatory Information Overview Electrical Safety Locate the AC outlet near the server! The AC power cords/cables are this product's main AC disconnect devices and must be easily accessible at all times. This product has not been evaluated for connection to an “IT” power system (AC distribution system having no direct connection to earth according to IEC 60950). Installation Conditions See installation instructions before connecting this equipment to the input supply.
HP Integrity cx2600 System Safety and Regulatory Information Overview Laser Safety NOTE Laser devices installed in this equipment must be certified as Class 1 Laser devices by the Regulatory Agency recognized by the country where the equipment is installed. NOTE If a Fibre Channel I/O card is present, the following laser safety statement applies. This product contains a laser internal to the Optical Link Module (OLM) for connection to the Fibre communications port.
HP Integrity cx2600 System Safety and Regulatory Information Overview Disposal of Waste Equipment by Users in Private Households in the European Union This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
HP Integrity cx2600 System Safety and Regulatory Information Overview USA Radio Frequency Interference (FCC Notice) The Federal Communications Commission (in 47 CFR Part 15 subpart B) has specified that the following notice be brought to the attention of the users of this product. NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
HP Integrity cx2600 System Safety and Regulatory Information Overview Taiwan BSMI This product has been reviewed and is fully compliant to CNS 13438 (CISPR 22: 1993) Class A. Warning Users: This is a Class A IT (Information Technology) Product. If this product is used in a domestic environment, radio frequency disturbance may occur, in which case the user may be required to take corrective actions.
HP Integrity cx2600 System Safety and Regulatory Information Overview Declaration of Conformity English 8 Chapter 1
