Installation Guide, Second Edition - HP Integrity cx2620

Figure 1-7 dc Power Supply Wire Connectors
Fault
DC Out DC In
Fault
DC Out DC In
rearview
dc Power
Supply Wire
dc Power
Supply Wire
dc Power
Supply Wire
dc Power
Supply Wire
6. Install the terminal barrier strip cover. Hang the cover on the upper tabs and snap the cover
into place.
7. Route the power cable through the power supply cable clamp and tighten the two knurled
knobs to secure the cable in place.
8. Connect the power cable to the dc power source.
Installing the Front Grill and Top Cover
CAUTION: Operation of the server without the front grill and top cover in place makes the
server susceptible to electromagnetic interference (EMI) and overheating problems, which can
result in system failure. Keep the front grill and top cover in place during normal operation.
Observe all electrostatic discharge (ESD) safety precautions while performing this procedure.
Failure to follow ESD safety precautions can result in damage to the server.
Installing the Front Grill
To install the front grill, follow these steps:
1. Hold the grill against the front of the server chassis in mounting position.
2. Tighten the five captive screws to secure the grill to the server chassis (Figure 1-8).
Installing Additional Components 25