Installation Guide, Second Edition - HP Integrity cx2620

Figure 1-10 Removing a Rear Panel Hot-Swappable Fan
chasfan5xtnd
Captive
Screws
Fan 5
PCI-X Card Installation
The server has four 64-bit, 133 MHz PCI-X accessory card sockets located in a removable card
cage. You must remove the PCI-X card cage before you can remove or install PCI-X cards. The
following sections describes how to remove and open the card cage, install PCI-X cards, and
reinstall the PCI-X card cage.
Removing the PCI-X Card Cage Assembly
To remove the PCI-X card cage assembly, follow these steps:
1. If rack-mounted, extend a slide-mounted server out from the rack until it stops. See
“Accessing a Rack-Mounted Server” (page 21).
2. Turn off the system. Disconnect all external cables.
Installing Additional Components 29