Installation Guide, Second Edition - HP Integrity cx2620

NOTE: DIMM connectors are keyed so they can only be installed in the correct orientation.
9. Firmly and evenly push on each side of the DIMM until it seats in the socket. The socket
retainer clips return to the upright position when the DIMM is fully inserted.
Figure 1-25 Inserting a DIMM into a DIMM Socket
dimm_sokt
10. Snap the socket retainer clips into place, ensuring that the DIMM is locked into the socket.
11. Repeat steps 7 through 10 for each DIMM to be installed.
12. Set the memory airflow guide in position and reinstall the top cover.
Installing the Server Into a Rack
This following information describes how to install the server into an HP rack, or an approved
non-HP rack.
HP Rack
HP servers that are installed into racks are shipped with equipment mounting slides. An
installation guide comes with each set of slides Installation Guide, Mid-Weight Slide Kit, 5065-7291.
Follow the steps in this installation guide to determine where and how to install the server into
the rack.
Non-HP Rack
The rack mounting guide enables you to evaluate the installation of HP equipment into non-HP
racks. Use this guide when you need to qualify whether you can install, maintain, and service
any HP equipment in a non-HP rack.
Installing the Server Into a Rack 43