Installation Guide, Second Edition - HP Integrity cx2620

Figure 1-32 Status Summary Page
Function Tabs
Navigation Bar
Display Screen
1. Select the Web interface functions by clicking the Function tabs at the top of the page. Each
function lists options in the Navigation Bar on the left side of the page.
2. Click an option link to display data in the Display screen; and click Refresh to update the
display.
3. Click the Remote Console tab. The remote console provides a serial console that behaves
similarly to the TUI.
Help
The iLO MP Web interface has a robust help system. To launch iLO MP help, click the Help tab
in the Display screen or click the ? at the top right corner of each page to display help about that
page.
Accessing the Graphic Console Using VGA
VGA is a method you can use to access the graphic console.
NOTE: You cannot access the iLO MP using VGA.
This method requires three elements:
• Monitor (VGA connector)
• Keyboard (USB connector)
• Mouse (USB connector)
The graphic console output displays on the monitor screen.
IMPORTANT: The server console output does not display on the console device screen until
the server boots to the EFI Shell. Start a console session using the RS-232 serial console port
method to view console output prior to booting to the EFI Shell or to access the iLO MP. See
“Configuring the iLO MP LAN Using the RS-232 Serial Console Port” (page 55).
To access the graphic console with VGA, follow these steps:
60 Installing the System