Installation Guide, Second Edition - HP Integrity cx2620

1. Access the EFI Boot Manager menu for the system on which you want to boot HP-UX.
2. Log in to the iLO MP and enter CO to select the system console. When accessing the console,
confirm that you are at the EFI Boot Manager menu. If you are at another EFI menu, select
Exit from the sub menus until you return to the screen with the EFI Boot Manager titles.
3. At the EFI Boot Manager menu, select an item from the boot options list.
Each item in the boot options list references a specific boot device and provides a specific
set of boot options or arguments you use when booting the device.
4. Press Return or Enter to initiate booting using the chosen boot option.
5. Exit the console and iLO MP interfaces.
To exit the system console and return to the iLO MP Main Menu, type Control-B. To exit
the iLO MP, type X at the main menu.
Procedure 1-37 Booting HP-UX (EFI Shell)
To boot HP-UX from the EFI Shell, follow these steps:
1. Access the EFI Shell environment for the system on which you want to boot HP-UX.
2. Log in to the iLO MP and enter CO to select the system console. When accessing the console,
confirm that you are at the EFI Boot Manager menu. If you are at another EFI menu, select
Exit from the submenus until you return to the screen with the EFI Boot Manager title.
3. From the EFI Boot Manager menu, select EFI Shell to access the EFI Shell environment.
4. At the EFI Shell environment, issue the map command to list all currently mapped bootable
devices.
The bootable file systems are listed as fs0:, fs1:, and so on.
5. Access the EFI System Partition (fsX: where X is the file system number) for the device
from which you want to boot HP-UX.
For example, enter fs2: to access the EFI System Partition for the bootable file system
number 2. The EFI Shell prompt changes to reflect the file system currently accessed.
The file system number can change each time it is mapped; for example, when the system
boots or when the map -r command is issued.
6. When accessing the EFI System Partition for the boot device, issue the HPUX command to
initiate the HPUX.EFI loader on the device you are accessing.
The full path for the loader is \EFI\HPUX\HPUX.EFI. When initiated, the loader references
the \EFI\HPUX\AUTO file and boots HP-UX using the default boot behavior specified in
the AUTO file.
You have 10 seconds to interrupt the automatic booting of the default boot behavior. Pressing
any key during this 10-second period stops the HP-UX boot process and enables you to
interact with the HPUX.EFI loader. To exit the loader (the HPUX> prompt), type exit to
return to the EFI Shell.
To boot the HP-UX operating system, do not type anything during the 10-second period
given for stopping at the HPUX.EFI loader.
The following example displays the device mapping table.
Shell> map
Device mapping table
fs0 : Acpi(000222F0,269)/Pci(0|0)/Scsi(Pun8,Lun0)/HD(Part1,Sig72550000)
blk0 : Acpi(000222F0,269)/Pci(0|0)/Scsi(Pun8,Lun0)
blk1 : Acpi(000222F0,269)/Pci(0|0)/Scsi(Pun8,Lun0)/HD(Part1,Sig72550000)
blk2 : Acpi(000222F0,269)/Pci(0|0)/Scsi(Pun8,Lun0)/HD(Part2,Sig72550000)
blk3 : Acpi(000222F0,2A8)/Pci(0|0)/Scsi(Pun8,Lun0)
Booting the Operating System 65