Installation Guide, Second Edition - HP Integrity cx2620

blk4 : Acpi(000222F0,2A8)/Pci(0|1)/Scsi(Pun2,Lun0)

Shell> fs0:

fs0:\> hpux

HP-UX Boot Loader for IA64 Revision 1.723

Press Any Key to interrupt Autoboot

\efi\hpux\AUTO ==> boot vmunix

Seconds left till autoboot - 9

7. Exit the console and iLO MP interfaces.

Press Control-B to exit the system console and return to the iLO MP Main Menu. To exit

the iLO MP, type X at the main menu.

Booting HP-UX Into Single-User Mode

To boot HP-UX in single-user mode from the EFI Shell follow these steps:

1. Access the EFI Shell environment for the system on which you want to boot HP-UX in

single-user mode.

2. Log in to the iLO MP and enter CO to select the system console. When accessing the console,

confirm that you are at the EFI Boot Manager menu. If you are at another EFI menu, select

Exit from the submenus until you return to the screen with the EFI Boot Manager title.

3. From the EFI Boot Manager menu, select EFI Shell to access the EFI Shell environment.

4. Access the EFI System Partition (fsX: where X is the file system number) for the device

from which you want to boot HP-UX.

5. When accessing the EFI System Partition for the boot device, issue the HPUX command to

initiate the \EFI\HPUX\HPUX.EFI loader on the chosen device.

6. Boot to the HP-UX Boot Loader prompt (HPUX>) by pressing any key within the 10 seconds

given for interrupting the HP-UX boot process. Use the HPUX.EFI loader to boot HP-UX

in single-user mode in the next step.

After you press a key, the HPUX.EFI interface (the HP-UX Boot Loader HPUX> prompt)

launches. For help using the HPUX.EFI loader, issue the help command. To return to the

EFI Shell, type exit.

fs0:\> hpux

HP-UX Boot Loader for IA64 Revision 1.723

Press Any Key to interrupt Autoboot

\efi\hpux\AUTO ==> boot vmunix

Seconds left till autoboot - 9

[User Types A Key to Stop the HP-UX Boot Process and Access the HPUX.EFI Loader ]

Type ’help’ for help

HPUX>

7. At the HPUX> prompt, issue the boot -is vmunix command to boot HP-UX (the

/stand/vmunix kernel) in single-user (-is) mode.

66 Installing the System