Manualshelf

Installation Guide, Second Edition - HP Integrity cx2620

ManualsBrandsHP ManualsServerHP Integrity cx2620 48GB DM9M Server
61626364656667686970
HPUX> boot -is vmunix
> System Memory = 4063 MB
loading section 0
................................................... (complete)
loading section 1
........ (complete)
loading symbol table
loading System Directory(boot.sys) to MFS
....
loading MFSFILES Directory(bootfs) to MFS
......
Launching /stand/vmunix
SIZE: Text:25953K + Data:3715K + BSS:3637K = Total:33306K
Console is on a Serial Device
Booting kernel...
8. Exit the console and iLO MP interfaces.
Press Control-B to exit the system console and return to the iLO MP Main Menu. To exit
the iLO MP, type X at the main menu.
Booting HP-UX Into LVM-Maintenance Mode
To boot HP-UX into LVM-maintenance mode, follow these steps:
1. Access the EFI Shell environment for the system on which you want to boot HP-UX into
LVM-maintenance mode.
2. Log in to the iLO MP and enter CO to select the system console. When accessing the console,
confirm that you are at the EFI Boot Manager menu. If you are at another EFI menu, select
Exit from the submenus until you return to the screen with the EFI Boot Manager title.
3. From the EFI Boot Manager menu, select EFI Shell to access the EFI Shell environment
4. Access the EFI System Partition (fsX: where X is the file system number) for the device
from which you want to boot HP-UX.
5. When accessing the EFI System Partition for the boot device, issue the HPUX command to
initiate the \EFI\HPUX\HPUX.EFI loader on the chosen device.
6. Press any key within the 10 seconds to interrupt the HP-UX boot process. This stops the
boot process at the HPUX.EFI interface (the HP-UX Boot Loader prompt, HPUX>).
7. At the HPUX.EFI interface, enter the boot -lm vmunix command to boot HP-UX (the
/stand/vmunix kernel) in LVM-maintenance (-lm) mode.
8. Exit the console and iLO MP interfaces.
Press Control-B to exit the system console and return to the iLO MP Main Menu. To exit
the iLO MP, type X at the main menu.
Shutting Down HP-UX
Use one of the following options to shut down HP-UX:
• To shut down and reboot an HP-UX system, use the shutdown -r command.
• To shut down and halt (power off) an HP-UX system, use the shutdown -h command.
For more information, see the shutdown(1M) manpage.
To shut down the HP-UX operating system, follow these steps:
Booting the Operating System 67