Site Preparation Guide, Second Edition - HP Integrity cx2620 Server

1 System Specifications

This chapter provides information on the basic system configuration, physical specifications,

and requirements for the HP Integrity cx2620 server.

This chapter addresses the following topics:

• “System Configuration” (page 13)

• “Dimensions and Weights” (page 14)

• “Electrical Specifications” (page 14)

• “Environmental Specifications” (page 17)

• “Physical and Environmental Specifications” (page 19)

System Configuration

Table 1-1 lists the minimum and maximum configurations for the server.

Table 1-1 Minimum/Maximum Configuration

MaximumMinimumSystem Name

TwoOneCPU

TwoOnePower Supplies

32 GB (8 X 4 GByte DIMMs)1 GB (4 X 256 MByte DIMMs)Memory

Three Hot Plug Disk Drives: 36 GB

15K Ultra 320 or 73 GB 15K HDD or

146 GB 10K HDD

One Hot Plug Disk Drive:36 GB

15K Ultra 320 or 73 GB 15K HDD

or 146 GB 10K HDD

Optional Internal Disks

One DVD, or one CD-RW/DVDOne DVD or One CD-RW / DVDOptional Internal Media

Four 64-bit, 133 MHz PCI-X slots

holding any of the following: Four

port 100base TX Ethernet LAN

adapter

ZeroOptional I/O

1 The standard configuration of the server includes two power supplies. While only one power supply can be used

to power the HP server, N+1 redundancy requires that a second power supply be installed. In normal operations,

both power supplies are in use at all times.

System Configuration 13