User Service Guide, Third Edition - HP Integrity cx2620 Server

ManualsBrandsHP ManualsServerHP Integrity cx2620 48GB DM9M Server

111

112

113

114

115

116

117

118

119

120

fs0:\> hpux

HP-UX Boot Loader for IA64 Revision 1.723

Press Any Key to interrupt Autoboot

\EFI\hpux\AUTO ==> boot vmunix

Seconds left till autoboot - 9

[User Types A Key to Stop the HP-UX Boot Process and Access the HPUX.EFI Loader ]

Type ’help’ for help

HPUX>

5. At the HPUX.EFI interface, issue the boot -is vmunix command to boot HP-UX (the

/stand/vmunix kernel) in single-user (-is) mode.

HPUX> boot -is vmunix

> System Memory = 4063 MB

loading section 0

................................................... (complete)

loading section 1

........ (complete)

loading symbol table

loading System Directory(boot.sys) to MFS

....

loading MFSFILES Directory(bootfs) to MFS

......

Launching /stand/vmunix

SIZE: Text:25953K + Data:3715K + BSS:3637K = Total:33306K

Console is on a Serial Device

Booting kernel...

6. Exit the console and iLO MP interfaces.

To exit the system console and return to the iLO MP Main Menu, press Ctrl-B. To exit the

iLO MP, enter X at the main menu.

LVM-Maintenance Mode HP-UX Booting

To boot HP-UX in LVM-maintenance mode, follow these steps from the EFI Shell:

1. Access the EFI Shell environment for the system on which you want to boot HP-UX in

LVM-maintenance mode.

To select the system console, log in to the iLO MP and enter CO.

When accessing the console, confirm that you are at the EFI Boot Manager Menu. If you are

at another EFI menu, select Exit from the submenus until you return to the screen with the

EFI Boot Manager heading.

To access the EFI Shell environment, select EFI Shell from the EFI Boot Manager menu.

2. Access the EFI System Partition (fsX: where X is the file system number) for the device

from which you want to boot HP-UX.

3. When accessing the EFI System Partition for the desired boot device, issue the HPUX command

to initiate the \EFI\HPUX\HPUX.EFI loader on the chosen device.

4. Enter any key within the ten seconds given for interrupting the HP-UX boot process. This

stops the boot process at the HPUX.EFI interface (the HP-UX Boot Loader prompt HPUX>).

5. At the HPUX.EFI interface, enter the boot -lm vmunix command to boot HP-UX (the

/stand/vmunix kernel) in LVM-maintenance (-lm) mode.

Booting and Shutting Down HP-UX 115