User Service Guide, Third Edition - HP Integrity cx2620 Server

Disk and I/O Path Logging
Some failures result in I/O path logging. These paths help to indicate the source of the error and
can be included in the error message or logged into console or event logs. Table 5-15 and Table 5-16
describe the disk drive and PCI-X slot paths for the server.
Table 5-15 Disk and DVD Device Paths
MHzRopePathDevice Slot
661Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)Slot 0
661Acpi(HWP0002,100)/Pci(1|0))/Scsi(Pun1,Lun0)Slot 1
661Acpi(HWP0002,100)/Pci(1|1))/Scsi(Pun2,Lun0)Slot 2
330Acpi(HWP0002,0)/Pci(2|0))/Ata(Primary,Master)DVD
Table 5-16 I/O Card Slot Paths
MHzRopePathI/O Slot
1334, 5Acpi(HWP0002,400)/Pci(1|0)Slot 1
1333Acpi(HWP0002,300)/Pci(1|0)Slot 2
1332Acpi(HWP0002,200)/Pci(1|0)Slot 3
1336Acpi(HWP0002,600)/Pci(1|0)Slot 4
Note: Rope 7 is used to access optional ECI at 33 MHz.
Fibre Channel Boot Configuration
The following procedure describes how to restore a Fibre Channel (FC) disk to the boot
environment.
142 Troubleshooting