User Service Guide, Third Edition - HP Integrity cx2620 Server

6 Removing and Replacing Components
This chapter provides procedures for removing and replacing components in the server.
This chapter addresses the following topics:
• “Required Service Tools” (page 153)”
• “Safety Information” (page 153)”
• “Accessing a Rack-Mounted Server” (page 154)”
• “Component Classification” (page 156)”
• “Removing and Replacing the Top Cover” (page 158)”
• “Removing and Replacing Hot-Swappable Chassis Fan Units” (page 159)”
• “Removing and Replacing Hot-Swappable Power Supplies” (page 162)”
• “Removing and Replacing Hot-Pluggable Disk Drives” (page 165)”
• “Removing and Replacing the PCI-X Card Cage ” (page 167)”
• “Removing and Replacing Hot-Pluggable PCI-X Cards” (page 170)”
• “Removing and Replacing the Air Filter Assembly” (page 172)”
• “Removing and Replacing the Front Grill” (page 175)”
• “Removing and Replacing Airflow Guides” (page 175)”
• “Removing and Replacing System Memory DIMMs” (page 177)”
• “Removing and Replacing the LED Status Panel” (page 181)”
• “Removing and Replacing the CD/DVD Optical Drive” (page 183)”
• “Removing and Replacing the Hard Drive Backplane Assembly” (page 183)”
• “Removing and Replacing the Power Supply Interface Assembly” (page 186)”
• “Removing and Replacing the Fan Control Board” (page 188)”
• “Removing and Replacing the iLO MP Card” (page 190)”
• “Removing and Replacing a Single-Core System Processor” (page 192)”
• “Removing and Replacing a Dual-Core System Processor” (page 205)
• “Removing and Replacing the System Battery ” (page 210)”
• “Removing and Replacing the System Board” (page 213)”
Required Service Tools
Service of this product requires one or more of the following tools:
• Electrically Conductive Field Service Kit (P/N 9300-1609)
• 1/4 inch flat blade screwdriver
• IPF CPU install tool (P/N 5069-4551)
• ACX-15 Torx screwdriver
• ACX-10 Torx screwdriver
Safety Information
Use care to prevent injury and equipment damage when performing removal and replacement
procedures. Voltages can be present within the server. Many assemblies are sensitive to damage
by electrostatic discharge.
Required Service Tools 153