User Service Guide, Third Edition - HP Integrity cx2620 Server

Removing a Rear Panel Hot-Swappable Fan
To remove a hot-swappable fan from the rear of the server chassis, follow these steps.
Figure 6-4 Removing a Rear Panel Hot-Swappable Fan
chasfan5xtnd
Mounting
Screws
Fan 5
1. If rack-mounted, you may need to extend the server out from the rack for better access. If
needed, slide the server out to the fully extended position.
2. Use the ACX-15 Torx screwdriver to loosen the two captive screws that secure the fan unit
to the server chassis.
3. Pull the fan assembly from the server chassis by pulling the curved handle.
Removing and Replacing Hot-Swappable Chassis Fan Units 161