User Service Guide, Third Edition - HP Integrity cx2620 Server

Figure 6-51 Reconnecting the Power Cable and Turbo Fan Cable
16. Place the processor airflow guide in position. See “Installing the Processor Airflow Guide”
(page 176).
17. Install the chassis top cover. See “Removing and Replacing the Top Cover” (page 158).
18. If necessary, reinstall the chassis in the rack. See “Inserting the Server Into a Rack” (page 156).
19. Reconnect power and system cables to rear panel connectors.
20. Power on the server.
21. To verify that the processor has been installed correctly, run the info cpu command at
the EFI Shell prompt.
Removing and Replacing the System Battery
Replace the non-rechargeable system battery by removing the top cover and accessing the system
board while the server is mounted in a rack, or after removing it from the rack.
210 Removing and Replacing Components