User Service Guide, Third Edition - HP Integrity cx2620 Server

Gigabit 10/100/1000 base-T Ethernet LAN A Port LEDs
The rear panel gigabit 10/100/1000 base-T Ethernet LAN A port has the following activity and
status LEDs.
Gigabit 10/100/1000 base-T Ethernet LAN A Port Activity LEDs
Figure 1-8 shows the activity LEDs and Table 1-6 lists the activity LED description.
Figure 1-8 Gigabit 10/100/1000 base-T Ethernet LAN A Port Activity LEDs
Table 1-6 lists Gigabit 10/100/1000 base-T Ethernet LAN A activity LED information.
Table 1-6 Gigabit 10/100/1000 base-T Ethernet LAN A Port Activity LEDs
StateColorLocationLAN LED
NoneNoneTopNot used
Blinking amber: the 1000 Mbps with Ethernet protocol and
twisted-pair wiring is enabled. Off: no link.
Amber2nd from top1000BT
Blinking green: the 100 Mbps with Ethernet protocol and
twisted-pair wiring is enabled. Off: no link.
Green2nd from bottom100BT
Blinking green: the Activity LED lights, and all other LEDs are
off for a 10 Mbps connection. Off: no activity.
GreenBottomActivity
Gigabit 10/100/1000 base-T Ethernet LAN A Status LEDs
The four Gigabit 10/100/1000 base-T Ethernet LAN A LEDs display the status of the server LAN.
Table 1-7 Gigabit 10/100/1000 base-T Ethernet LAN A Status LEDs
StatusStateColorLocationLED
No 1000 Mbps link has been detected. Port is
linked at 1000 Mbps.
Off/OnGreenTop1. Gbit
No 100 Mbps link has been detected. Port is
linked at 100 Mbps.
Off/OnGreen2nd from top2. 100 Mbit
No 10 Mbps link has been detected. Port is
linked at 10 Mbps.
Off/OnGreen2nd from
bottom
3. Link
No LAN activity has been detected. Flashing or
lit solid indicates LAN activity.
Off/OnGreenBottom4. Activity
VGA Port
VGA is a method you can use to access the graphic console.
Controls, Ports, and LEDs 33