User Service Guide, Third Edition - HP Integrity cx2620 Server

NOTE: You cannot access the iLO MP using VGA.
iLO MP Reset Button
The iLO MP Reset button resets the iLO MP.
iLO MP Card LEDs
There are two LEDs located on the iLO MP card that can be of assistance when troubleshooting.
These LEDs are located close to the rear of the server. You can view these LEDs through cooling
holes in the rear panel of the server. The LEDs are located as shown in Figure 1-9 and are described
in Table 1-8.
Figure 1-9 iLO MP Card LEDs
Table 1-8 lists the iLO MP card LEDs.
Table 1-8 iLO MP Card LEDs
DescriptionLED
This fault indicator flashes when an iLO MP fault is detected.DS1
The iLO MP heartbeat indicator flashes when the iLO MP is active.DS2
34 Overview