Asynchronous Terminals and Printer Processes Programming Manual

CONTROL, CONTROLBUF, AND SETMODE FOR PRINTERS
SETMODE Operations
Table C-1. Fault Status Summary
Operator Aux Status Aux Status Problem
Display . 8:11 . 12:15 Description
_______________________________________________________________
None 0 0 No faults
E01 0 1 Paper out
E03 0 3 Cover open
E06 0 6 End of ribbon
E07 0 7 Break
E11 1 1 Parity error
E12 1 2 Unprintable character
E22 2 2 Carrier loss
E23 2 3 Buffer overflow
E30 3 0 Printwheel motor fault
E31 3 1 Carriage fault
E32 3 2 Software fault
E34 3 4 Hardware fault
67 = AUTODCONNECT for full-duplex modems. Monitor carrier
detect or DSR.
parameter-1 = 0 disable AUTODCONNECT (default)
1 enable AUTODCONNECT
parameter-2 is not used.
68 = sets horizontal pitch. For subtype 4:
parameter-1 = 0 normal print (default)
1 condensed print
2 expanded print
parameter-2 is not used.
| The SETMODE 68 operation is not supported for 5512,
| 5515/5516, or 5573 printers.
110 = set shift in/shift out (SISO) code extension.
parameter-1 = 0 disable SISO (default)
1 enable SISO
parameter-2 is not used.
C-8 November 1987