Asynchronous Terminals and Printer Processes Programming Manual

TERMINAL I/O
Comparison of ATP6100 and TERMPROCESS
Table 2-1. ATP6100 and TERMPROCESS Feature Comparison
| ATP6100 TERM-
| Feature LIU1* LIU4** 3681 PROCESS
| _______________________________________________________________
|
| ENQ/ACK flow control Yes Yes Yes Yes
|
| CTS flow control Yes Yes Yes No
|
| XON/XOFF flow control Yes Yes Yes No
|
| Half-duplex, reverse- Yes No Yes Yes
| channel modems
|
| 200-baud operation Yes Yes Yes Yes
|
| 2000-baud operation Yes Yes Yes No
|
| 3600-baud operation Yes No No Yes
|
| Transmit and receive No Yes Yes No
| at different speeds
|
| Read termination on ETB Yes Yes Yes No
|
| Dynamic System Config- No No No Yes
| uration
| _______________________________________________________________
|
| * LIU1 includes SPCIU, DPCIU, 3605 CC, and 6105 CC
| ** LIU4 includes SPCIU, DPCIU, 3606 ACC, and 6106 ACC
Terminals can be connected through either an RS-232C or current-
loop interface. They can be connected either directly to the LIM
or patch panel (hard wired) or through a modem.
2-2 November 1987