AutoSYNC Software User's Guide (Update 17)

Command Interpreter
HP AutoSYNC User’s Guide—522580-018
8-16
ADD SYNCFILESET
An entry is written into the log file for each file or OSS directory that is purged
as a result of the synchronization.
PURGE is not supported for SQL tables.
RATE percentage
the percentage of elapsed time the synchronization process should be active.
The default is 100%.
START hh:mm:ss
the start time of the synchronization window. The time is entered in the format
hour:minute:seconds between 00:00:00 and 23:59:59. The maximum window
is 24 hours.
When the START option is specified the INTERVAL is ignored and one
synchronization per day is performed at the start time.
If the start time is larger than the stop time, then it is assumed the
synchronization window crosses into the next day. If STOP is omitted, the
synchronization occurs once a day at start time. In this case the INTERVAL
option is ignored.
STOP hh:mm:ss
the ending time of the synchronization window. The time is entered in the
format hour:minute:seconds between 00:00:00 and 23:59:59. The maximum
window is 24 hours.
If the stop time is smaller than the start time, then it is assumed the
synchronization window crosses into the next day.
If STOP is omitted but START is specified, synchronization happens once a
day at the specified START time.
SUSPEND
the file set should be added to the synchronization schedule without activating
it.
The user can subsequently activate the file set using the ACTIVATE
SYNCFILESET command.
TIMEEX[ACT]
that a file is synchronized if the modification timestamp of the source does not
exactly match the modification timestamp of the destination file.