AutoSYNC Software User's Guide (Update 17)

Command Interpreter
HP AutoSYNC User’s Guide—522580-018
8-37
ALTER SYNCFILESET
* | fset-id | fset-id - fset-id
identifies a synchronization file-set ID or a range of file-set IDs. Up to 32 ranges
can be entered.
If fset-id - fset-id is specified, the second fset-id must be greater than the f i r s t .
* designates all configured syncfilesets for the syncuser.
common-options
AUTOSUSPEND
specifies that the configured file set will execute once and then will
automatically be suspended. This is similar to a one-time synchronization,
except that the synchronization options are kept in the configured syncfilesets
and can be activated each time the user wants the synchronization to be
performed. Many AUTOSUSPEND synchronizations can be activated with a
single ACTIVATE BATCHID command.
INFO SYNCFilset command displays the last synchronization time.
This option is designed to facilitate the use of AutoSYNC with a batch
scheduler such as Netbatch.
guardian-only-options: (continued)
{ RENAMEO[PEN] | NO RENAMEO[PEN] }
{ RESTORE restore-program | NO RESTORE }
{ SECURE "rwep" | NO SECURE }
{ SQLREDEF | NO SQLREDEF }
{ SUBVOLPURGE | NO SUBVOLPURGE }
{ USEBINDERTIME | NO USEBINDERTIME }
{ ZZINC[LUDE] | NO ZZINC[LUDE] }
OSS-only-options:
{ ALLHARDLINKS | NO ALLHARDLINKS }
{ ALLSYMLINKS | NO ALLSYMLINKS }
{ OWNERG[ROUP] {{ group-id | group-user } | NO OWNERG[ROUP] }
{ SECURE “rwxrwxrwx” | NO SECURE }