AutoSYNC Software User's Guide (Update 17)

Operations and Management
HP AutoSYNC User’s Guide—522580-018
A-5
Stopping a Monitor
Stopping a Monitor
The monitor process should be available for scheduled synchronizations to occur. If the
monitor is stopped, synchronizations in progress will continue, but none are started.
In normal situations, however, the monitor process should be stopped only when the
system is being shut down.
Use the STOP MONITOR command to stop the monitor.
Monitor Commands
The monitor accepts interactive command requests from AUTOSYNC. All monitor
commands are preceded by the MONITOR keyword, which instructs AUTOSYNC to
pass the rest of the command line to the monitor and then display the results.
Commands are terminated by the end of the line, not a semicolon. Multi-line
commands are not recognized.
Command Description
BACKUPCPU
The BACKUPCPU command is identical to the TACL command with the same name.
cpu
the CPU number where the monitor backup process should be started. If omitted,
the backup process is terminated.
Table A-1. Commands and their definitions
Command Name Description
BACKUPCPU
Alters the backup CPU of the monitor
process.
LOG
Starts and stops an activity logging.
REFRESH NOW
Updates monitor cache
STATUS
Obtains status of various objects.
SECURITY
Controls users who are permitted to issue
monitor commands.
SWITCH
Causes primary and backup processes to
exchange roles.
BACKUPCPU [ cpu ]