AutoSYNC Software User's Guide (Update 19)

Command Interpreter
HP AutoSYNC User’s Guide—522580-020
8-78
INFO SYNCFILESET
* | fset-id | fset-id - fset-id
identifies a synchronization file-set ID or a range of file-set IDs. Up to 32 ranges
can be entered.
If fset-id - fset-id is specified, the second fset-id must be greater than the f i r s t .
* designates all configured syncfilesets for the syncuser.
If fset-range is omitted, all syncfilesets for the current user are displayed.
info-option
DETAIL
displays all parameter values for the file set.
LOG [ LAST n | ALL | ERRORS ] [ COUNT n ] [ SYSTEM \system-name ]
displays the output of the synchronization activity for the syncfileset. The
information is extracted from the log file SLggguuu in the MapDB. If
parameters are omitted, LOG displays the latest log entry.
LAST n
displays the output of the most recent n synchronizations.
ALL
displays the output of all the synchronizations recorded for the syncfileset.
ERRORS
displays the last entry in the log only if the synchronization reported errors.
COUNT n
displays the output of n synchronizations recorded for the syncfileset.
Specify ALL or LAST to display more than the most recent entry.
SYSTEM \system-name
the name of the destination system for the syncfileset. This option is only
required if the destination system was configured using the asterisk (*) in
ADD SYNCFILESET or ALTER SYNCFILESET. Otherwise, the option is
ignored.
If system-name is omitted, the output of the most recent synchronization is
displayed.
OBEYFORM [ FILESETID ]
displays the text of the ADD SYNCF[ILESET] command that was used to
configure the attributes for the file set. This option overrides the DETAIL and
LOG options.