AutoSYNC Software User's Guide (Update 19)

One-time Synchronization

HP AutoSYNC User’s Guide—522580-020

3-21

Running the Destination Synchronization Process as

a Local Process

Running the Destination Synchronization Process as a Local Process below for

instructions.

Running the Destination Synchronization Process as a Local

Process

To enable ASYSYNC or ASYSYNCP to become a local process on a remote system,

perform the following operations on the ASYSYNC or ASYSYNCP program on the

destination system:

1. In BIND, issue the following commands:

2. At the TACL prompt, SQL compile ASYSYNC:

3. At the TACL prompt, accelerate ASYSYNC:

4. Then, as SUPER.SUPER, license ASYSYNC:

IF synchronizing over TCP/IP, perform the same steps for ASYSYNCP.

ADD * FROM ASYSYNC

SET LIKE ASYSYNC

ALTER CALLABLE^LOCAL^LOGON, CALLABLE ON

SET SAVEABEND ON

BUILD ASYSYNC!

SQLCOMP/IN ASYSYNC/NOREGISTER ON

AXCEL ASYSYNC, ASYSYNC

OCA ASYSYNC

FUP LICENSE ASYSYNC

Note. Once you have altered ASYSYNC or ASYSYNCP with the above Binder commands,

ASYSYNC or ASYSYNCP must be licensed; otherwise, all synchronizations that use that

program will fail.

WARNING. By configuring a callable ASYSYNC or ASYSYNCP, the systems administrator

allows a syncuser to perform operations on the remote system that would have previously

required the knowledge of the local password.