BackBox H4.00 Tape Encryption Option

Configuration
23 BackBox H4.00 Tape Encryption
• Select the Add link from the VLE-CLIM Client Information section and:
o Select a CLIM ID proposed in the drop down box
o Click on the ADD VLE-CLIM Client button. The selected entry will
appears in an CLIM ID table bellow the button
o Repeat for each wanted entries
• Click on the Save link
The CLIM ID drop down box entries proposed are all CLIM connected with a virtual
LTO 4 tape device with a VLE key generation policy activated. If target(s) CLIM ID
is(are) not proposed, configuration may have change since VLE tape encryption has
been activated (See Enabling VLE on tapes in SCF.) In that case, you will need to
refresh all VT Controller devices configuration.
To refresh VT Controller devices configuration: