BackBox H4.00 Tape Encryption Option

40 BackBox H4.00 Tape Encryption
- Detect the Volume Groups using the Key manager ID.
- Verify the VTC that are routes to the corresponding Data Stores have the
connectivity to the Key manager.
- Verify the VTCs have the encryption license option fo at least one drive.
Key Manager – Test report
The report shows all VTCs that were involved by the verifications, possibly followed
by general messages. For each VTC, there can be three sections:
• A section “VTC Client” showing the report generated by the VTC.
The report is green for success, orange if any warning not preventing the
connectivity, red for a complete lack of connectivity.
• A section “VLE-CLIM Client” showing a report of counts of FC LTO 4 drives per
port and connected host WWN.
The report is green for success, orange if no LTO 4 drive is currently connected
to a recognized CLIM, red for a complete lack of connectivity.
• A list of messages about the VTC.
The messages are explained in the BackPak Troubleshooting and Messages
manual.
Three Test report samples are presented after the common underlying VTC
configuration below, each sample showing its specific Key manager configuration
page and the associated Test report page:
• Mixed environment test report
• VTC only test report
• VTC only test report with errors