BackPak H4.00 Troubleshooting and Messages Manual

Messages
114 BackPak H4.00 Troubleshooting & Messages
Number Text Explanation Action
4003 Error [rc] in
#DEFINESETATTR
[attrname] [value]
Error returned by the
TACL function
#DEFINESETATTR.
Refer to the HP
document TACL
reference.
4004 Expecting a remote MVS
dataset name
A parameter of the
EZX_START_XFER TACL
macro is invalid.
Refer to the description
of macro in this
manual NonStop
Application Interface
section.
4005 DEFINE [defname]
already exists
The EZX_START_XFER
macro cannot add the
specified DEFINE name.
Choose a different
DEFINE name or delete
the DEFINE before the
macro call.
4006 Expecting a BCOM
request-name
A parameter of the
EZX_REMOTE_SUBMIT
TACL macro is invalid.
Refer to the description
of macro in this
manual NonStop
Application Interface
section, and the BCOM
on Tandem User guide.
4007 Unable to add the
DEFINE [defname], [rc]
A #DEFINEADD was
rejected during the
execution of the
EZX_REMOTE_SUBMIT
TACL macro.
Check the output of
SHOW DEFINE that
follows the message
and that can display a
consistency check
number.
Check numbers are
described in the HP
manual DSM Tape
Catalog User Guide,
Consistency check
section.
Refer the HP manual
TACL (Reference :
Appendix B Error
codes)
4011 BCOM request-name
'[reqname]' must begin
by '#'
A parameter of the
EZX_REMOTE_SUBMIT
TACL macro is invalid.
Refer to the description
of macro in this
manual NonStop
Application Interface
section, and the BCOM
on Tandem User guide.