BackPak H4.00 Troubleshooting and Messages Manual

Messages
116 BackPak H4.00 Troubleshooting & Messages
Number Text Explanation Action
4506 Source Element Address
%d is Empty
Source of a library
media move request is
invalid.
Use the BackPak web
UI to ‘Get the library
inventory’ that will
resync the slots
location stored in the
BackPak inventory.
Re-issue the
command.
4507 The volume is still use
by the tape drive. Please
eject the volume first.
A library changer action
is rejected because the
volume is still used by
the NonStop host.
Wait for the tape
application unloads the
volume.
Then, eventually use
the BackPak web UI,
Node staus page, to
unload the volume.
4508 %s: Check Condition
occurs: KEY (%X) ASC
(%02X) ASCQ (%02X)
A library changer action
is rejected for an
internal error not
interpreted by BackPak.
Refer to the
documentation of the
library.
4509 Source Element Address
%d doesn't contain the
volume %s.
The library inventory
stored in the BackPak
catalog does not match
the actual library
inventory.
Use the BackPak web
UI to ‘Get the library
inventory’ that will
resync the slots
location stored in the
BackPak inventory.
Re-issue the
command.
4510 %s: malloc error - %s Internal error. Verify the NonStop
memory management
operates normally.
Contact the Product
Support.
4511 The device connected to
the SCSI IOP is not a
MEDIA CHANGER"
The device configured in
the BackPak domain to
control the media
changer is not
connected to a media
changer.
Use the BackPak web
UI to verify/update the
Open SCSI device
name.
Verify the SCF
configuration and cable
connections.