BackPak H4.00 Troubleshooting and Messages Manual

Messages
120 BackPak H4.00 Troubleshooting & Messages
Number Text Explanation Action
5013 Error in the root
structure of the WINFILE
storage (%1)
The indexed Windows
file for the specified
virtual volume was
corrupted.
Contact the Product
Support.
5014 Device not in use A SCSI command was
received for a device
that has no volume
loaded.
The device is ready to
load a volume.
5015 Device not found for
tape %1
A VT Controller received
a load or an unload
command for a device
not defined in the VT
Controller internal
configuration.
Contact the Product
Support.
5016 Error deleting the
WINFILE storage (%1-
(%2))
Delete file rejected by
the Windows file-system
in the VT Controller.
Refer to the Microsoft
documentation.
5017 Error getting disk free
space on %1 (%2)
Impossible to get the
amount of free space on
disk.
For WINFILE storage,
the VT Controller will
assume that there is
enough free space to
write the volume to
process.
If the error occurs on a
local disk,
Contact the Product
Support.
For remote disks,
check authorizations
and functionality of
non MS-Windows
servers.
5018 Error getting full path
name on %1 (%2)
Impossible to get full
path name of a disk
location for WINFILE.
Check the syntax and
availability of the
Master path and Data
paths configured in the
DataStore.
5019 Missing Open Arguments
for %1
Internal error. Contact the Product
Support.
5020 Not enough free disk
space for %1
There is not enough disk
space for the operation.
BackBox product:
refer to the storage
software.
EZX-GatWay product:
Refer to the installation
chapter, in the
Configure the EZX-
Gateway Domain
section.