BackPak H4.00 Troubleshooting and Messages Manual

Messages
124 BackPak H4.00 Troubleshooting & Messages
Number Text Explanation Action
5042 A Volume Load
Operation has been
cancelled for (%1)
An Unload command
cancels the execution of
a load volume.
None.
5043 Running [FetchData]
operation for (%2)
A pre-fetch operation is
started for loading a
virtual volume kept in a
TSM DataStore.
None
5044 Cannot %1 tape device
%2 : %3
A
VIRTUALIZE/MATERIALI
ZE session fails on
action reported at the
%1 position.
If reported as an error:
Check the identification
of the device in MS
Windows.
Check the MS Windows
Event log and the
Guardian EMS log.
Reset the tape device.
5045 Materializing virtual
volume %1 ended with
error
A Volume MATERIALIZE
operation failed.
Check the MS-Windows
Event log and the
Guardian EMS log for
previous errors
5046 Materializing virtual
volume %1 ended
successfully
A Volume MATERIALIZE
operation completes
successfully.
Take the media out of
the MS-Windows
device.
5047 Error getting object from
[%1] (%2) for Storage
(%3)
Error accessing data in a
TSM server.
See ‘Errors returned by
TSM’ at the beginning
of this appendix.
5048 Error sending new TSM
password in [%1] (%2)
for Storage (%3)
A TSM password
renewal fails.
See ‘Errors returned by
TSM’ at the beginning
of this appendix.
5049 Error sending end of
volume in [%1] (%2)
for Storage (%3)
The notification of the
end of an operation to
the Domain Manager
fails.
Using the Web User
Interface, check in the
Volume detail if any
current operation is
still registered. If yes,
verify the actual status
of the volume. If the
current operation is
wrong, reset it
(Volume details, Edit
button, and Reset
current operation).