BackPak H4.00 Troubleshooting and Messages Manual

Messages
29 BackPak H4.00 Troubleshooting & Messages
Number Text Explanation Action
112 Service cannot start.
There is no %1 target
mode adapter found on
the server
Warning message
indicating that the SCSI
(or FC) service can not
start because no
corresponding SCSI (or
FC) hardware/driver was
found on the server
None if currently the
server doesn’t have
the hardware
corresponding to the
service that cannot
start. (The service
should ideally not be
configured for
Automatic startup in
Windows).
If the hardware is
present and the
corresponding service
cannot not start, refer
to the Installation
Guide to review
hardware.driver
installation step.
113 Error while initializing
performance counters:
%1 (%2) - %3
The internal
performance monitoring
is not functional.
Other BackBox
functionality is not
affected.
Search for other error
messages in the
Windows Event Logs.
114 Error starting service
%1: (%2) - %3
Internal error occuring
while starting the
service specify in %1
position
Search the code (%2)
into this document for
appropriate
explanation and action.
999 Error code: %1, Reason:
%2, Other information:
%3
Technical information
about a error returned
by the Windows
operating system.
Search for other error
messages in the
Windows Event Logs.
1001 Guardian error %1 from
%2 %3
A Guardian procedure
call failed.
Refer to the Guardian
Procedure Errors and
Messages manual.
1002 AWAITIOX completes
with error %1, %2 tag
%3
Guardian AWAITIOX
procedure call failed.
Refer to the Guardian
Procedure Errors and
Messages manual.
1003 AWAITIOX completes
with warning %1, %2
tag %3
Guardian AWAITIOX
procedure call ended
with a warning.
Refer to the Guardian
Procedure Errors and
Messages manual.