BackPak H4.00 Troubleshooting and Messages Manual

Messages
34 BackPak H4.00 Troubleshooting & Messages
Number Text Explanation Action
2604 Socket error %1 on
completion of %2
TCP/IP error. Refer to the TCP/IP
Programming HP
NonStop manual.
Socket errors.
2605 Program parameter
missing: accept address
The Domain Manager
does not receive the
expected parameter
from the LISTNER.
Contact the Product
Support.
2606 TCP accept address ‘%1’
should contain a dot
The Domain Manager
does not receive the
expected parameter
from the LISTNER.
Contact the Product
Support.
2607 TCP accept address ‘%1’
should be numeric
The Domain Manager
does not receive the
expected parameter
from the LISTNER.
Contact the Product
Support.
2608 TCP accept address ‘%1’
rejected by inet_addr()
The Domain Manager
does not receive the
expected parameter
from the LISTNER.
Contact the Product
Support.
2609 Inbound socket closed
when processing %1
The TCP/IP client closed
the session before
receiving the reply.
Might be caused by a
Web browser session
abruptly closed.
None, if no other
symptom shows up.
2610 Unable to solve TCPIP
address name %s,
gethostbyname() error
%d
The TCP/IP configuration
in use does not resolve
the address name.
Check spelling of the
address name.
Check the configured
TCP/IP DEFINEs.
2611 Socket error %1 at
connect to address %2
port %3
Unable to establish a
TCP/IP session with the
specific address.
Refer to the TCP/IP
Programming HP
NonStop manual.
Check spelling of the
address and the port.
Check the configured
TCP/IP DEFINEs.