BackPak H4.00 Troubleshooting and Messages Manual

Messages
45 BackPak H4.00 Troubleshooting & Messages
Number Text Explanation Action
3082 Unexpected unload of
%s-%s at %s not
registered in BackPak
domain. The unload is
related to the operation
%s at %s. The
operation state in
BackPak domain is %s
A VTC notifies the
domain manager that a
volume is unloaded.
But this unload event is
not compatible with the
current status of the
volume in domain, and
the domain manager
does not register this
unload.
Check the status of the
volume (Current
operation) in the
domain catalog. Reset
the “Current operation”
if required. The stats
of last operation might
be lost.
3083 Message from %s %s
%s received for the
domain '%s', domain
'%s' is expected.
There is a discrepancy
between the Domain
configuration and a VT
Controller control
message.
Make sure the Domain
Id stored in all VT
Controllers (entered in
the “Domain Address”
after a MS-Windows
log-in) is equal to the
Domain ID entered in
the Domain
configuration
3084 Volume %s not
available, in use by %s
operation started on
%s.
A load or a
materialization operation
is rejected because the
volume is already in
use.
If the Current
operation associated to
the volume is out of
sync, use the Web
User Interface to
update the Volume in
the VT Controller
catalog (Reset the
current operation)
3085 VT Controller %s is not
a route to the store %s.
The VT Controller
specified for a
Virtualization
Materizalization cannot
access the DataStore
holding the involved
virtual volume.
Check the Domain
configuration and
retry.