BackPak H4.00 Troubleshooting and Messages Manual

Messages
63 BackPak H4.00 Troubleshooting & Messages
Number Text Explanation Action
3197 BB020_RESERVE DRIVE
%s: can not specify
both NONE and a
volume class.
Syntax error in the
BB020_RESERVE TACL
macro
Modify the CLASS
parameter of
BB020_RESERVE
3198 BB020_RESERVE:
DRIVE parameter
missing
Syntax error in the
BB020_RESERVE TACL
macro
Specify the DRIVE
parameter of
BB020_RESERVE
3199 BB020_RESERVE DRIVE
%s: drive not found in
the configuration.
Specification error in the
BB020_RESERVE TACL
macro
Check the device
names configured in
the BackPak domain.
The device must be
configured in an active
VTC
3200 BB020_RESERVE DRIVE
%s: volume class %s
not found in the
configuration
Specification error in the
BB020_RESERVE TACL
macro
Check the Volume
classes configured in
Volume groups.
3201 BB020_RESERVE DRIVE
%s: maximum number
of volume classes (%ld)
exceeded.
Internal limit exceeded Contact the Product
Support.
3202 BB020_RESERVE
DRIVE: CLASS
parameter missing
Syntax error in the
BB020_RESERVE TACL
macro
Specify the CLASS
parameter of
BB020_RESERVE
3203 Drive %s now reserved
to volumes class(es)
%s.
Feed back of the
BB020_RESERVE macro
None
3204 BB020_RESERVE_DRIVE
: %ld drives updated,
%ld drives listed.
Feed back of the
BB020_RESERVE macro
None
3205 MountId: %s for volume
%s. VTC %s returns
busy storage condition:
%s
A busy conditon is
returned by the Data
store
The load will be retried
according the
busycheck -retry-
interval parameter in
BBEXTCFG file
Check for previous
EMS message from
BackPak.
Check the MS-Windows
Applicatin log