BackPak H4.00 Troubleshooting and Messages Manual

Messages
67 BackPak H4.00 Troubleshooting & Messages
Number Text Explanation Action
3224 BB023: %s backed up
Windows files have been
deleted. Deleted size:
%s bytes
Summary of execution
of macro
BB023_DEL_BACKEDUP
None
3225 Normal job end A TACL macro finished None
3226 Internal status %s
prevented the use of
drives free in NonStop.
%s.
%i devices LOADING
($device1, $device-2…)
%i devices RESERVED
($device3, $device4…)
(see below the version
for BackLib)
This message is
embedded in msg 3227
reporting a failed load.
Msg 3226 explains why
devices FREE in NSK can
not be used for loading
a volume.
Possible status can be:
“LOADING”: a restore
script is running in the
VTC
“LOADED”: the VTC is
replying READY to host
polling, waiting for tape
NSK tape recognition
from the in NSK host
“INACTIVE” : the host
did not polled the virtual
device within the
configured timeout.
"NOT CONFIGURED” :
the drive is not
configured in the VTC
“UNLOADING” : VTC is
still unloading a volume
“LICENSE OVERFLOW” :
the number of licensed
ports is reached, the
device is another port
that exceeds the license
key limitations
Some status
(LOADING, LOADED,
UNLOADING) are
expected normal status
preventing a load to
execute.
Status LOADED and
UNLOADING should not
last more than a few
seconds (up to one
minute in worst cases).
Other status are
reported by the other
message 3230 and
require investigation.
Some FREE devices
might also be not
eligible because they
don’t emulate the
requested media type.