BackPak H4.00 Troubleshooting and Messages Manual

Messages
68 BackPak H4.00 Troubleshooting & Messages
Number Text Explanation Action
3226
(see above the version
for BackLib)
Internal status %s
prevented the use of
drives free in NonStop.
%s.
%i devices LOADING
($device1, $device-2…)
%i devices RESERVED
($device3, $device4…)
This message is
embedded in msg 3227
reporting a failed load.
Msg 3226 explains why
some devices FREE in
NSK can not be used for
loading a volume.
Possible status can be:
“LOADING”: a media is
still being moved by the
robotic to a drive.
“LOADED”: the media is
loaded in a drive
"NOT CONFIGURED” :
the drive is not seen by
the library changer
“UNLOADING” : a media
is still being moved by
the robotic from a drive
to a storage slot
“IDLE” : a media that
has been ‘unloaded’ by
the host is still in the
drive, waiting to be
moved to a storage slot.
This move can be
initiated by a manual
Unload in the web
application, Node status
page.
Some status
(LOADING, LOADED,
UNLOADING) are
expected normal status
preventing a load to
execute.
Status LOADING and
UNLOADING could last
several tens of second
for a physcial library.
Other status are
reported by the other
message 3230 and
require investigation.
Other FREE device
might also be not
eligible because they
don’t emulate the
requested media type.
3227 MountId: %s. No
available resource to
mount %s. %s
The loading of a virtual
volume on any device
fails for the specified
reason.
Action depends on the
failure reason.
For a load request for
output, the load will
always be retried.
3228 MountId: %s. Can not
mount %s on device %s
The loading of a virtual
volume on a specific
device fails for the
specified reason.
Action depends on the
failure reason.
For a load request for
output, the load will
always be retried.