BackPak H4.00 Troubleshooting and Messages Manual

Messages
71 BackPak H4.00 Troubleshooting & Messages
Number Text Explanation Action
3241 No virtual device of
active VTC is configured
for node %s
A load request is issued
from a NonStop node
that has no device
configured in an active
VTC
Define a virtual device
for the node.
Eventally re-activate
inactive VTC.
3242 Additional queries
executed to refresh the
operational status of
node %s.
Status of tape drives
and mount requests are
normally maintained in
the OPER file by the
EMS Extractors, for
lighter processing of
web requests.
In some conditions, for
example when the
configuration has been
modified or the EMS
Extractor has stopped,
the information is not
available and external
entities must be
queried:
- NSK MEDIASRV
- VTCs
- Library Changer
Controllers
Be sure the EMS
Extractor is running
correctly.
Eventually restart it
and check for error
messages in EMS.
3243 EMS Extractor %s for
node %s is not running
or not identified
BBEXT program is not
running.
There will be no
automatic mount.
Start the EMS
Extractor on the
indicated NSK node.
3244 Unload rejected. Volume
%s assumed loaded on
device=%s by
mountId=%ld, is
recorded in operation
%s, device=%s,
mountId=%ld
An unload does not
execute, because the
volume is no more in
the expected state.
None
3245 Unable to communicate
with EMS Extractor of
node %s. %s
The Domain manager
can not communicate
with the EMS Extractor
Obsolete message
3246 Pre-load for volume %s
continuation of %s is
not initiated. %s
contains less than %s
bytes of data.
Pre-load does not
execute if the volume to
pre-load has less than 1
MB of datat
None