BackPak H4.00 Troubleshooting and Messages Manual

Messages
79 BackPak H4.00 Troubleshooting & Messages
Number Text Explanation Action
3293 Media move %s in
library %s from %s to
%s rejected %ld-%s.
The move of a media in
a library, such as a load
or the move to an I-E
slot, is rejected.
Analyze the message
at the end of this
message.
3294 Library %s rejects the
Inventory command
%ld-%s.
The query of the library
inventory is rejected.
Analyze the message
at the end of this
message.
3295 Media move in library
%s from %s to %s is
invalid %s.
An illegal media move is
attempted.
Analyze the message
at the end of this
message.
Use the BackPak web
UI to ‘Get the library
inventory’ that will
resync the slots
location stored in the
BackPak inventory.
3296 Volume %s is no longer
loaded in a drive of
library %s, unload
command not executed
The volume to unload is
no more reported as
loaded by the library
changer.
Verify the status of
library drives in the
BackPak web UI, Node
status page.
Restart the drive in
SCF to ensure a fresh
status on the NSK side.
3297 Unload %s initiated
through the NonStop
tape drive.
A volume unload is
executed from the
NonStop host.
This shoud trigger a
library move of the
media to a storage slot.
Verify in the BackPak
web UI, Node status
page, that the drive is
actually unloaded
soon.
Repeat the manual
unload if the drive
stays IDLE (volume
loaded but inaccessible
from the host).