BackPak H4.00 Troubleshooting and Messages Manual

Messages
81 BackPak H4.00 Troubleshooting & Messages
Number Text Explanation Action
3303 Labelling TMF volume
%s (drive %s) rejected
by TMFSRV code %d.
%s
The equivalent of a
TMFCOM command ADD
TAPEMEDIA is rejected.
Analyze the TMFSRV
return-code and
associated text in the
message.
HP Reference:
TMF Management
Programming Manual
3304 s.%s labelled volume
%s (#%ld/%ld) on %s
in volume group %s.
Volume is being
unloaded.
A library volume has
just been labeled
successfully by
MEDIASRV or TMFSRV.
The volume is being
move to a storage slot.
None.
3305 %s process %s.%s
processed %ld volumes
in library %s.
A ‘LABELING’ or ‘MOVE
TO IE’, or ‘MOVE FROM
IE’ process has
completed.
None.
3306 No tape drive available
to label volumes for
data store %s
It is impossible to use
the requested number of
drives for concurrent
labeling.
This happens when:
- there is not enough
drives connected to the
NSK host executing the
label command
- drives are down
- drives are used by
other applications
This condition prevents
the labeling process to
start.
Once the labeling
process started, this
condition initiates an
infinite loop of retries
after 3 minutes delay.
If the labeling process
started, usually no
action is issued.
To allow the process to
start:
- verify the status of
drives in the web UI,
Node status page.
- manage to have at
least one available
drive on the NSK node
that holds the
DSMTC/TMF catalog.