BackPak H4.00 Troubleshooting and Messages Manual

Messages
90 BackPak H4.00 Troubleshooting & Messages
Number Text Explanation Action
3355 Primary and secondary
volume groups cannot
have the same DSM/TC
VOLCAT %s. DSM/TC
data will not be
imported for Volume
group %s. This check
can be disabled in the
Catalog import
configuration.
Same DSMTC volcat
between primary and
secondary sites is not
allowed.
Change DSMTC volcat
and filecat on the
secondary side.
If the DSMTC catalog
name (that must be
qualified by node
name) is really the
same, change the Data
Store Import
configuration to enable
“Import to the
secondary system
which is different from
the primary system but
shares the same node
name as the primary
system.”.
3356 Invalid or unqualified
DSM/TC filecat name
%s.
The DSM/TC filecat
configured in a
SECONDARY volume
group must be qualified
by a node name, and
known by the
MEDIASRV running on
this node.
Fix the volume group
configuration of
SECONDARY volume
groups
3357 Invalid or unqualified
DSM/TC volcat name
%s.
The DSM/TC volcat
configured in volume
group must be qualified
by a node name, and
known by the
MEDIASRV running on
this node.
Fix the configuration of
volume groups
3358 DSM/TC not updated for
volume group %s.
Invalid DSM/TC pool
'%s'. %s.
The pool name
configured in a BackPak
volume group is not a
valid DSM/TC pool
name.
Change the name of
DSM/TC pool or volcat
in the volume group
configuration.
If a MEDIASRV return-
code is reported in this
message, look for
return-code
explanations in the HP
manual DSM/TC
Management
Programming Manual.