BackPak H4.00 Troubleshooting and Messages Manual

Messages
97 BackPak H4.00 Troubleshooting & Messages
Number Text Explanation Action
3392 The status of DSM/TC
tapevolume %s on node
%s is %s. It must be
SCRATCH or BAD to
allow deletion.
A BackLib labelling
process finds an entry
already existing in
DSM/TC or TMF.
Such entries are deleted
to be recreated by the
labelling process, only if
their status is SCRATCH
or BAD.
This volume is not (re)
labelled.
3393 Invalid Key Manager Id
%s
A Key manager ID is
unknown in the domain
configuration.
Configure the missing
Key manager, or
remove the reference
to it.
3395 Global availability of Key
Manager %s:
error|warning|success.
Summary result of the
functionality of a Key
manager.
Examine the detail of
the test reply, error
messages and test
report.
3396 Client for Key Manager
%s type %s is not
configured (or VLE
drives not connected)
for VTC %s that is route
to %s for Volume group
%s
When the encryption is
enabled for a Volume
group, all VTCs that are
routes to the associated
Data store must be able
to join the Key
manager, i.e they must
be client for this Key
manager.
This test is made for all
Volume groups, and
failed for the specified
instance.
Add to the
configuration of this
Key Manager, a VTC
client, or a VLE CLIM
client connected to one
of the VTC virtual
drives.
3397 %s is defined as Client
to Key Manager %s,
but there is no VTC with
this name
A VTC is defined as Key
manager client, but does
not exist anymore in the
configuration as VTC.
Configuration
corruption, remove the
Key manager client or
define the VTC.
3398 Device %s %s.%s (%s)
reserved for HP VLE is
not UP (status %s)
In the VTC domain
configuration, a tape
device is set for HP VLE
but is not usable
because it is not up.
Start the device in SCF
and verify the VTC
reports it as FREE in
the GUI Status page or
the VTC configuration
page.